Milton CAT 988H - Manual (Page 4)

Structures. Combine the use of robotic
welding and castings in critical high-
stress areas. More than 90 percent of
the 988H structure is robotically welded
to provide highly consistent welds and
increased strength. Castings are also
used in several areas to increase strength
by helping to spread the loads and reduce
the number of parts. 1 Full Box-Section Frame. Has been
improved for maximum strength and
minimum weight. The frame rail is now
extended further forward, improving
rail to hitch strength. 2 Box-Shaped Tower. Is designed
for improved resistance to twisting
for maximum strength. The tilt cylinder
tower’s high-strength steel plates direct
stress down to the lift cylinder case
mounting tube, absorbing impact and
loading forces. This design results in
a narrower tower which gives a better
operator viewing area.
4
Superior design of structures, along with the bold, box-section front linkage
provide superior strength.
Structures and Fabricated Box Boom