Milton CAT 988H - Manual (Page 8)

1 Electro-Hydraulic Control System.
Increases hydraulic efficiency and
enhances operator comfort through
low-effort, fingertip controls. XT-3™
and XT-5™ hose along with reliable
components reduce the risk of leaks
and blown lines, helping protect
the environment.
2 Lift and Tilt System. Consists of
larger bore lift and tilt cylinders and
a two position main hydraulic pump,
contributing to increased performance
and serviceability.
Two Position Main Hydraulic Pump.
Is controlled by the Electronic Control
Module (ECM). A solenoid valve
controls the pump displacement, allowing
the ECM to adjust hydraulic flow during
the loader cycle. This strategy results in
fast hydraulics and greater lift forces,
leading to optimized performance.
3 Load Sensing Steering. The STIC
control system integrates the steering
and transmission into a single controller.
A STIC operated, pilot valve controls the
flow to steering cylinders. The steering
system utilizes a variable displacement
pump for maximum machine performance
by directing power through the steering
system only when needed.
4 Case Drain Filtration. A total of
three filters for the main hydraulic,
steering and fan pumps protect against
contamination with easy access
for service.
8
Efficient, well-balanced hydraulics and low-effort electronic controls mean high
performance and exceptional durability.
Hydraulics and Electronic Monitoring
1