Milton CAT G200LG4 200kW_250kVA LG Installation Guide - Manual (Page 15)

13
DANGER

Make sure to turn OFF both the NORMAL
(UTILITY) and STANDBY (EMERGENCY) power
supplies before trying to connect power source
and load lines to the transfer switch. Supply
voltages are extremely high and dangerous.
Contact with such high voltage power sup-
ply lines causes extremely hazardous, possibly
lethal, electrical shock.

Be sure to maintain proper electrical clearances
between live electrical parts and grounded
metal. Allow at least one-half inch of clearance
circuits up to 400 amps.
DANGER

Extremely high and potentially lethal supply
voltages are present at the transfer switch when
verifying phase rotation. This operation should
only be performed by a trained electrician.
Section 3 - Operation
Liquid-cooled Generators