Milton CAT G3516 1800 rpm 1040 kW 60 Hz Spec Sheet - Manual (Page 3)

G3516
GAS GENERATOR SET
TECHNICAL DATA
G3516 LE Standby Power Gas Generator Sets — 1800 rpm
Power Rating @ 0.8 PF without Fan ekW 1040
kV•A 1300
Generator Frame Size 693
Engine Lubricating Oil Capacity gal 106
System Backpressure (Max Allowable) in water 27
Exhaust Flange Size — (Internal Diameter) in 7.1
Length in 187.9
Width in 86.8
Height in 79.2
Shipping Weight lbs 20 560
Engine Coolant Capacity with Radiator gal
100% Load
Fuel Consumption (100% load) with Fan BTU/bhp-hr 7899
per ISO3046/1: +5%, -0% tolerance
Motor Starting (35% voltage dip) SkVA (volt) 2626 (480)
Combustion Air Inlet Flow Rate ft 3 /min 3435
Exhaust Gas Flow Rate (at stack temp) ft 3 /min 8583
Heat Rejection to Aftercooler BTU/min 9746
Heat Rejection to Exhaust (total) BTU/min 54 853
Heat Rejection to Jacket Water (total) BTU/min 58 557
Heat Rejection to Atmosphere from Engine BTU/min 7155
Heat Rejection to Atmosphere from Generator BTU/min 2821
Exhaust Gas Stack Temperature Deg F 1603
Deration for Engine
Altitude – 3.5% per 500 feet above ft 4000
2% per 10° F above Deg F 77
* Note: For permitting see TMI data.