Velleman WS3080 - Manual (Page 7)

WS3080
V. 01 – 21/06/2013 7 ©Velleman nv
measurement
Weather
forecast
tendency Refer to §8.2 for more information.
tendency
select tendency
pressure threshold set threshold between 2 ~ 4 hPa (default = 2hPa)
storm threshold
set threshold between 3 ~ 9 hPa (default = 4hPa)
Indoor
humidity high alarm set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
low alarm set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max (both indoor humidity [7] and max icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
reset min (both indoor humidity [7] and min icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
Indoor
temperature unit mode select °C or °F
high alarm set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
low alarm set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max (both indoor temperature [8] and max icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
reset min (both indoor temperature [8] and min icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
Outdoor
humidity high alarm set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
low alarm set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max (both outdoor humidity [11] and max icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
reset min (both outdoor humidity [11] and min icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
Outdoor
temperature display mode select whether to show outdoor temperature, wind chill or dew point on the
display [12]
unit mode select °C or °F
high alarm set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
low alarm set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,