Velleman UTP05 - Manual (Page 12)

Atlas IT User Guide October 2012 – Rev 6
Page 11
Optional Identified Terminators
The Atlas IT (from firmware version 2.0 and later) supports the use of
Identified Terminators.
Atlas IT
ID Terminators
Atlas IT Patch Lead
Wall Socket
Patch Panel
22
23
24
ID: 22
These special terminators can be used in exactly the same way as the standard
(non-identified) terminators. They are automatically recognised by the Atlas IT
and the identity number is displayed along
with the cable analysis results.
Up to 24 Identified Terminators are
available, allowing for the rapid testing,
and identification of large numbers of
network cables or sockets.
The number of the Identified Terminator
may not be displayed if there are cable faults or if some of the connections
between the Atlas IT and the terminator are missing (e.g. 4-wire economy
patch cables).