Velleman UTP05 - Manual (Page 13)

Atlas IT User Guide October 2012 – Rev 6
Page 12
Display Cable-Making Instructions
If the Atlas IT is started without a network cable and terminator connected,
brief instructions on the connections for common network cables are displayed.
The displayed instructions are only to serve as a reminder of course, please
seek guidance from a qualified person if you are unsure how to implement this
information:
First the unit confirms the connection
patterns for the two most common cable
configurations (Straight-Through Patch
cables and Crossover cables).
The colours of all 8 wires are then
displayed.
It is important to note that lines 1&2, 3&6, 4&5 and 7&8 are twisted pairs.
Refer to the Ethernet Connection Chart for more cable connection details.