Velleman VTLD100 - Manual (Page 10)

VTLD100
V. 02 – 26/11/2013 10 ©Velleman nv
• Contact your dealer for spare parts if necessary.
12. Battery
WARNING
• Malfunction may occur if the power is on when the
battery is replaced.
• Keep batteries away from children.
• Do not puncture batteries or throw them in fire as they
may explode.
• Do not attempt to recharge non-rechargeable batteries
(alkaline).
• Dispose of batteries in accordance with local regulations.
A flashing battery indicator [6] indicates that battery power is low and
batteries must be replaced.
1. Switch the device off [10].
2. Open the battery cover at the back of the meter (see illustration A)
and take out the old batteries.
3. Insert two new 1.5V AAA batteries (LR03C) in accordance with the
polarity markings inside the battery compartment.
4. Close the battery compartment.
5. If the device is not used for a longer period of time, remove the
batteries to avoid leakage and risk of corrosion.
13. Technical Specifications
range 0.05 - 50m (0.16 ft - 164 ft)
accuracy ± 1.5 mm (± 0.06")
laser <1 mW class 2
wavelength: 635 nm
operating temperature 0°C - 40°C (32°F - 104°F)
IP rating 54
power supply 2 x 1.5V AAA batteries LR03C (incl.)
dimensions 115 x 48 x 28 mm
weight 135 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior
notice.