User manual, Introduction, Safety instructions – Velleman DCM269 User Manual
Page 3: Features, Overview
DCM269
V. 02 – 04/09/2013
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
2.
Safety Instructions
Risk of electrocution. Before use you should always test the voltage detector on a known live
circuit to verify proper operation of the meter
Double insulation
•
This meter has been designed with attention to safety, but the user must also take care to respect the
safety prescriptions described below.
•
Do not exceed the maximum values for current or voltage measurements.
•
Use extreme caution when working with voltages in excess of 25V AC rms. These voltages are considered a
shock hazard.
•
Never operate the device if the back panel or the cover of the battery or fuse compartment is not securely
in place.
3.
Features
•
3 2/3 digit (2400 counts) LCD display with white LED backlight
•
18 mm (0.7") jaw opening
•
0.1-200 A current measurement
•
built-in non-contact AC voltage detector (100-600 Vac)
•
built-in flashlight
•
frequency measurement 40 Hz - 1 kHz
•
autoranging with auto power off
•
data-hold function
•
overload protection for all ranges
•
overrange and low battery indication
•
supplied with pouch
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
current sense jaw
6
clamp trigger
2
flashlight button
7
one-touch DCA ZERO key
3
rotary function switch
8
non-contact AC voltage indicator light
4
data hold and backlight key
9
non-contact AC voltage detector probe tip
5
LCD display