Technical specifications – Velleman DVM3218 User Manual

Page 9

Advertising
background image

DVM3218

19.01.2011

©Velleman nv

9

a. General mainenance:
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

b. Fuse Replacement
• Remove COM probe [9] and test pin [1] from the circuit under test.

• Switch off the multi-meter.

• Unscrew the test pin [1] and remove the front cover.

• Remove the fuse from the fuse holder and replace it with a new fuse of the same type and

with the same specifications (F500mA/250V, Ø 5 x 20mm).

• Close the cover and re-install the test pin [1].
c. Battery Replacement
• Replace the battery as soon as the “

” indication appears on the display.

• Remove COM probe [9] and test pin [1] from the circuit under test.

• Switch off the multi-meter.

• Unscrew the release knob [8] and remove the back cover.

• Replace the batteries by 2 new batteries of the same type and with the same specifications

(1.5V – LR44).

• Close the battery compartment carefully and tighten the release knob [8].

Notes:

o Do not try to repair or calibrate the meter yourself; contact your dealer.
o Replace damaged accessories immediately; order them at your local dealer.
o Do not use the meter when it is damaged.

9. Technical specifications

This device is not calibrated when purchased!
Regulations concerning environment of use:
• Use this meter only for measurements in CAT I, CAT II and CAT III environments (see §4)

• Use this meter only in a pollution degree 2 environment (see §5)
Ideal temperature

18-28°C

Ideal relative humidity

75%

Max. altitude

2000m

Overvoltage/installation category CAT III 600V / CAT II 1000V
Pollution degree

Pollution degree 2

Operating temperature

0°C~40°C (RH<80%)

Storage temperature

-10°C~60°C (RH<70, store without batteries!)

fuses

mA range F500mA / 250V, 5 x 20mm

Overrange indication

yes (‘OL’)

Low battery indication

yes (

)

Polarity indication

‘-’ automatic indication

“Hold” function

yes

Backlight function

no

Automatic switch off

yes

Power

2 x 1.5V LR44 batteries V13GA (incl.)

Dimensions

230 x 35 x 20mm

Weight ±200g
Accessoires

manual / batteries

Advertising