Velleman CAMCOLI5 - Manual (Page 4)

CAMCOLI5
V. 01 – 06/09/2012 4 ©Velleman nv
• Avoid strong mechanical strains or vibrations. The bending radius of the gooseneck must be at least
6 cm.
• Clean the CAMCOLI5 after each use.
• Do not use when visible damage to the device is noticed.
4. Features
• ideal for checking hard-to-reach areas, e.g. behind walls, suspended ceilings, etc.
• 4 built-in white LEDs
• adjustable LED intensity
• video and picture recording
• records images on SD card (not incl.)
• comes with: 3 exchangeable top-pieces
o
magnetic top: to pick up small metal pieces
o
hook: to retract wires or other small object
o
mirror: to look behind corners or in shallow holes.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 power button 9 USB plug
2 gooseneck (± 85 cm) 10 SD card slot (max. capacity 32 GB)
3 camera head with LEDs 11 video output connector
4 gooseneck connector 12 power adapter connector
5 control buttons 13 display
6 LED brightness control 14 accessory tools: hook, magnet, mirror
7 handle 15 display unit stand
8 handle release button
6. Preparation
Mounting the Gooseneck
1. Place the gooseneck [2] on the gooseneck connector [4], making sure that the pins are properly
aligned.
2. Gently push gooseneck and connector together, then turn the nut clockwise all the way to secure the
gooseneck [2].
Attaching or Detaching the Handle
• To detach the handle [7] from the display unit, press the release button [8] and slide the handle
down and to the right to release.
• To attach the handle back to the display unit, press the release button and click the handle into
place.
Placing the Display Unit Upright
1. Detach the display stand [15] from the back of the display unit.
2. Slot one end of the stand into one of the grooves at the back of the display unit.
You can now position the display unit upright.
Inserting the SD Card
1. Lift the cover from the SD card slot [10].
2. Insert an SD card (not included) in the card slot. Push it in until it clicks into place. The SD icon
appears on the display.
3. Place the cover back to protect the slot.
4. To remove the SD card again, lift the cover and push the card gently so that it pops out. Place the
cover back to protect the slot.