Velleman CAMCOLI5 - Manual (Page 7)

CAMCOLI5
V. 01 – 06/09/2012 7 ©Velleman nv
Taking Photos
1. Make sure an SD card is installed in the camera.
2. Switch on the camera, and insert the camera head into the space you want to inspect.
3. Press REC [5] to take a photo.
Note: When the memory card is full, “MEMORY FULL” appears on the display. You need to delete some
files to make free space. If necessary, connect the camera to a pc to back up the files before you delete
them.
Viewing Photos
1. Press ESC.
2. Use ▲ and ▼ to select the photo icon and press SET. The list of photos appears.
3. Use ▲ and ▼ to select the desired photo and press SET to see a larger image.
4. Press ▲ or ▼ to zoom in or out.
5. Press ESC to return to the list of photos.
6. Press ESC to exit.
Deleting a Video or Photo
You can delete individual video or photo files.
Tip: To delete all files at once, you can format the memory card.
To delete an individual video or photo file:
1. Make sure video recording is stopped.
2. Press ESC.
3. Use ▲ and ▼ to select the video or photo icon and press SET.
4. Use ▲ and ▼ to select the desired video or photo and press SET.
5. Press MENU.
6. Use ▲ and ▼ to select √ and press SET to delete the file.
To exit without deleting, select X and press SET. The camera deletes the file and shows the next
photo/video in the list.
7. Press ESC to exit.
7.4 Connecting to a Computer
1. Switch the camera on.
2. Detach the handle from the display unit and lift the cover from the USB plug [9].
3. Insert one end of the included USB cable into the plug.
4. Insert the other end of the cable into a free USB port on your computer.
The display shows “USB”.
5. On the pc, open My Computer and look for the drive that represents the camera.
You can copy, delete, or view the files from here.
Note: To disconnect the camera from the pc, use Windows’ Safely Remove Hardware function to stop
the device before you unplug the USB cable.