ACP HDC182 Owner's Manual - Manual (Page 13)

13
Cooking Display
dISPLAYS dESCRIPTION
READY
READY displays when oven control will accept
entries.
00:00 Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
COOK LEVEL COOK LEVEL displays while oven is operating.
The cooking level is displayed above as a number 1
through 9. If no number is displayed, the oven is
cooking at full power.
POWER
POWER is displayed while the oven is generating
microwave energy during a cooking cycle.
Programming Display
dISPLAYS dESCRIPTION
P:0 Displays when oven is in programming mode for
single pad memory only.
P: Displays when oven is in programming mode for
double pad memory.
OP: -- Displays when oven is in user option mode. User
options can then be set or specified.
CF: Displays with a numerical cooking factor when the
X2 pad is pressed.
P:-- 1
Displays briefly when programming a specific
cooking stage. Number (1 through 4) indicates
the stage that is being programmed.
There are words in
the display that never
actually display.
The display is used for
many different models of
microwaves. Depending on the model,
certain words or symbols may never be
highlighted or become visible.
Oven Display
Oven Control
Pads
Self-sealing Base
Door Handle
(Pull to open)
Oven Door Window
(Some Models)
Removeable
Splatter Shield
(Not Shown)
Rear Air Vents
(some models)
5' 6" Power Cord
Oven Cavity Light
(Some Models)
Stainless Steal
Outer Case
STYLE 2
Operation