Banks Power Dodge Trucks: (Gas ’02 - 10 5.7L HEMI & 4.7L) Exhaust- Monster Exhaust, '09 5.7L Dodge Ram 1500, Hemi, CCSB Only User Manual
Page 6
Advertising
6
97085 v.1.0
11.
Remove the protective covering
from the tailpipe tip.
Caution: the protective covering
may ignite and burn if not removed
prior to running the engine.
12.
Your system includes two (2)
Banks Power logos designed to
complement the Dodge HEMI emblems
on the vehicles front fenders.
13.
Re-connect the negative battery
cable. Start the engine and listen for
exhaust leaks. Tighten the exhaust
clamps as necessary. Whenever
possible, tack weld slip connections
to prevent disengagement is
recommended.
The Banks Monster Exhaust installation
is now complete.
Figure 3
Advertising