Banks Power Dodge Trucks: (Diesel ’94 - 98 5.9L Cummins) Speed Control- Exhaust Brake (Automatic Trans) - Manual (Page 5)

21.
Locate the orange wire with dark
blue stripe from pin 23 at connector
A (black, right most connector), see
Figure 6. For 94-95 vehicles, this
wire will be located at pin 22 of the
pcm connector.
22.
Plug the connector on the end
of the blue wire from the Banks
Brake harness into the red t-tap
installed in Step 21.
23.
Plug the connectors in the green
and black wires from the Banks
Brake harness into the connectors on
the black solenoid valve leads.
9 6 9 8 6 v . 3 . 0
| 5
Figure 5
Figure 6