Banks Power Chevy_GMC Trucks: Duramax LB7 (Diesel ’01 - 04 6.6L) Tuner- Six-Gun Diesel Tuner w_ optional Speed-Loader Module (LB7 & LLY) '01-05 (iQ) Compatible with Optional Banks iQ User Manual
Page 31
96815 v.3.0
31
If the Six-Gun Diesel Tuner should ever
need to be removed from the vehicle,
perform the following:
1.
Disconnect the Six-Gun’s 38-pin
connector from the factory harness.
2.
Re-connect the vehicle’s 38-pin
connector back into the factory
harness.
3.
Disconnect the Six-Gun’s 24-pin
connector from the factory harness.
4.
Re-connect the vehicle’s 24-pin
connector back into the factory
harness.
5.
Disconnect the 2-ring terminals
from the EGT thermocouple.
6.
Disconnect the 3 small connectors
on the ‘In-cab cable’ and gently pull
the cable back through the firewall.
7.
Remove the Six-Gun Diesel Tuner.
Failure to follow the above instructions
when removing the module will result
in a “check Engine” light on the dash
and a Diagnostic Trouble code being
stored in the factory computer, in
addition to the engine not running.
-END, SEcTION 10-
Section 10
REMOVAL OF THE SIx-GUN DIESEL TUNER
✁
Figure 20