Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- AutoMind programmer '02 Class-A MH - Manual (Page 12)

12
96365 v.1.0
The Options menu should only be
utilized to check for the current
vehicle tune, to set or clear a
password, and if directed by Banks
staff. Many of the listed options are
not necessary to complete the Banks
Performance tune. The listed options
are to be used primarily for the
identification of serial numbers and
ID’s.
Note: Fuse 21 does not need to be
removed for options.
1.
Open the option menu by
highlighting then press ENTER. (See
Figure 13). The Options menu displays
the available parameters and specific
data assigned to your Banks OttoMind
programmer. Scroll through the list
using the list using the UP and DOWN
arrow keys to view the Options menu
contents. See
Figure 19
-PC Communication- The ‘PC
Communication’ option is for Banks
authorized service only. This feature is
not intended for customer use.
-Display Serial No.- The ‘Display Serial
No.’ option displays the Banks
OttoMind programmer serial number
and manufacture date.
-Set Password- The ‘Set Password’
option allows you to set your own
personal password. Use the Up or
Down arrow keys to scroll through and
set a numeric digit. Use the Left and
Right arrow to move to the next digit.
Repeat the previous instruction until
you have set all four digits to your
liking, and then press the Enter button
on the keyboard.
-Clear Password- The ‘Clear Password’
option allows you to clear the
previously set security password.
Press the Enter button on the
keyboard to clear the previously set
security password.
-Tool ID- The ‘Tool ID’ option displays
the tool identification number.
-About Tool- The ‘About Tool’ option
displays the current Banks OttoMind
installed software and hardware.
-Tool Status- The ‘Tool Status’ option
displays the Banks OttoMind
programmer locked or unlocked
status.
NOTE: The Banks OttoMind
programmer will become locked once
the factory tune has been backed-up.
You will not be able to use the Banks
OttoMind programmer on any other
vehicle when it is in a locked status.
You will however be able to use the
diagnostic and real time data reading
capabilities on any 8.1L workhorse
class-A motorhome and other GM
vehicles, regardless of tool status. See
Figure 20.
Section 5
OPTIONS
Figure 19
OPTIONS
PC Communication
Display Serial No.
Set Password
Clear Password
Tool ID
About Tool
Tool Status
Car Tune
Send Software ID
Figure 20
Tool Status
Tool is Unlocked
Press any key