Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- AutoMind programmer '02 Class-A MH - Manual (Page 4)

Familiarize yourself with Banks
OttoMind keypad controls. The keypad
will allow the user to navigate
between screens and to select
functions. (See
Figure 1 ).
Connecting to OBD II
1.
Locate the OBD II connection port
in your vehicle. The OBD II connection
port is located under the dash panel
and can be located on either side of
the steering wheel.
2.
Connect your Banks OttoMind
programmer to the vehicle OBD II
connection port.
3.
Turn the Ignition key to ON position.
Do not START the engine. When the
OBD II connector is plugged in
correctly, the Banks OttoMind will
illuminate its screen. If the Banks
OttoMind does not come on then
check the fuse to the cigarette lighter
in the fuse panel.
After connecting the Banks OttoMind
OBD II connector to the vehicle, the
Banks OttoMind Programmer will
automatically power on. The screen
will display the Banks OttoMind logo,
then display the ‘Main Menu’. (See
Figure 2).
Section 2
INSTALLING THE BANKS OTTOMIND PROGRAM
Figure 0
Ottomind 03-05 2.01
Tune It
Diagnostics
Options
Figure 1: Display and Keypad Description
ESC KEY:
Scroll page back to
previous page
ARROW LEFT:
Scroll menu to the left
ARROW DOWN:
Scroll down the menu
4
96365 v.1.0
ARROW UP:
Scroll up the menu
ARROW RIGHT:
Scroll menu right
(Use this key to view
entire descriptions)
ENTER KEY:
Select parameter
highlighted in menu