Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- AutoMind programmer '02 Class-A MH - Manual (Page 7)

96365 v.1.0
7
point you can unplug the Banks
OttoMind programmer and replace
fuse 21 (if removed previously).
Installation of the Banks OttoMind
program is complete.
NOTE: To verify that the performance
tune was accomplished correctly
proceed to Steps 23 thru 24.
23.
To verify that the Banks
Performance tune was installed go to
the main menu and select Options.
Once in the Options menu, scroll
through the menu and select CAR
TUNE by highlighting then press
ENTER.
24.
The CAR TUNE option displays the
current tune installed in the vehicle.
The current tune should be the “Banks
Performance tune”. If the Banks
Performance tune is not the current
tune then repeat steps 14 thru 21
-END, SECTION 2-
Figure 9
Successful Tune
Tune is installed
Replace removed fuses
Unplug the OttoMind.
Press any key…