Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- AutoMind Programmer '03-05 Class-A MH User Manual
Page 7
96374 v.4.0
7
20.
Data uploading will continue,
please wait for 10 seconds.
21.
Data upload is complete
and Performance tune has been
successfully installed. Press any key to
continue.
22.
When the screen displays Figure
10, the data upload is complete and
the Banks OttoMind tune has been
successfully installed. Now press any
key to return to the main menu. At
this point you can unplug the Banks
OttoMind programmer and replace
fuse 21. Installation of the Banks
OttoMind program is complete.
NOTE: To verify that the performance
tune was accomplished correctly
proceed to Steps 23 thru 24.
23.
To verify that the Banks
Performance tune was installed go to
the main menu and select Options.
Once in the Options menu, scroll
through the menu and select cAR
TUNE by highlighting then press
ENTER.
24.
The cAR TUNE option displays the
current tune installed in the vehicle.
The current tune should be the “Banks
Performance tune”. If the Banks
Performance tune is not the current
tune then repeat steps 14 thru 21
-enD, secTiOn 2-
Figure 10
Tune is Installed
Replace fuse 21
Unplug the OttoMind
Press any key…