Grain Systems PNEG-524 - Manual (Page 6)

6 PNEG-524 Roof Exhaust Fan
3. PRE INSTALLATION
18" & 24" Roof Fan Package
Figure 3A An 18" Roof Exhaust Fan
Your model package should contain items shown in above chart .
Note: Before starting the assembly and installation of the roof exhaust fan, check to see
that all items called out on the packing list have been received. In case there are any
shortages, contact your dealer. If there is any damage during shipment, file a claim
with the carrier.
Service Information
Fill in the information here for your records. If you have a question regarding your roof exhaust
fan, contact the dealer from whom you purchased the unit. If he is unable to answer your
question, refer to the factory. This information must be available before contacting the dealer or
factory, if service is ever needed.
18" Roof Fan Package 24" Roof Fan Package
Roof fan assembly Roof fan assembly
Bottom mounting flange Manual PNEG-524
Hardware package Fan housing top plate
Manual PNEG-524 Adaptor-top, right & left side
Rain hood top, right & left side
Hardware package
(4) Template parts
Fan model number _____________________________________________________
Fan serial number _____________________________________________________
Bin diameter __________________________________________________________
Grain type ____________________________________________________________
Grain depth __________________________________________________________
Line voltage (measured) ________________________________________________
Dealer purchased from __________________________________________________
Date purchased _______________________________________________________