Grain Systems Bin Flooring PNEG-1830 - Manual (Page 21)

PNEG-1830 54' Dura-Lok Plank and Support Manual 21
5. Flooring - Planks
Floor Splice Details
Some of the floor planks will need to be spliced together. ( See Figure 5F on Page 24 and plank layout
on Page 41 and plank length chart on Page 42 .) Install plank length A first, then install the corresponding
plank length B. Continue until floor is complete. Center and install two (2) splices (PCL-7009) at each plank
splice location using self-drilling screws. Use eight (8) screws at the end of the splice for each plank,
four (4) on each side.
(See Figure 5A below and Figure 5B on Page 22.)
Figure 5A Floor Splice Layout
T
w
o (
2
)
splices located
at
each
splice location.
(See
F
igu
re
5
B
o
n
Pa
ge
22.)