Inner door assembly (continued) – Grain Systems Bin Accessories PNEG-1884 User Manual
Page 18
Advertising
4. Installation Instructions
18
PNEG-1884 Special 90' Externally Stiffened 2 Ring Door for Use with Enhanced Stiffeners
Inner Door Assembly (Continued)
The upper and lower door assemblies can now be assembled to the inner door weldment. Attach the
door assemblies to the hinges using 3/8" x 4-1/2" bolts (S-1443), nuts (S-456) and washers (S-248).
Adjust bearing pins and latch bar holders for best fit and tighten all bolts.
Figure 4E
Advertising