Grain Systems PNEG-1934 - Manual (Page 112)

4. Dryer Electrical Conduits
112 PNEG-1934 Single Module Vision Hybrid Portable Dryer
Lower Junction Box, Metering Roll Motor Conduit and Rear
Discharge Conduit
Figure 4E
NOTE: The parts pointed out on this page are listed on Page 113 .
Lower junction box (left)
Rear discharge switch conduit at rear left gusset
where 1/2" EMT conduit terminates.
Conduit to metering roll speed sensor and
rear discharge switch.
(See photos below
and on Page 113.)
Metering Roll speed sensor and rear discharge switch
conduit. This is a photo of the front section of the conduit
that runs through the gussets on the left side of the dryer.
Metering roll motor conduit connection
Lower junction box (right)
1 4
7
5
6
6
5
4
3
2
2
8
1
9
10
8
1
11
1
1
13 12
14
14
14 15
Coupler for 1/2" EMT conduit
7
14
13
Conduit to metering roll
motor. (See metering
roll motor conduit
connection
below .)