Grain Systems PNEG-1587 - Manual (Page 4)

4 PNEG-1587 KBIC SCR Control Kit Installation
1. Introduction
Read these Instructions before Installation and Operation
KBIC Control Kit
The KBIC control kit is a service replacement package for the discontinued Woods SCR control boards
installed on Farm Fans dryers from 1990 to 2007.
The KBIC kit supersedes previous SCR kits and contains the necessary parts for replacing the following
SCR control boards:
1. 415-3621-0 SCR CONTROL 1 HP-WOODS W/54
2. 415-4563-3 SCR CONTROL 1/3 HP-WOODS W/54
3. 415-3019-7 SCR CONTROL 3/4 HP-WOODS
4. 415-2302-8 SCR CONTROL 3/4 HP-WOODS W/54
5. SCR-003 SCR CONTROL KIT WOODS
6. 056-1580-2 SCR MOTOR CONTROL-WOODS
Beginning in 1990, the Woods SCR board was installed on all new CMS-H, CMS-J, and M-Series dryers.
As of July, 1992, the Woods SCR board was installed on all new CF/AB and CF/SA series dryers.
KBIC Parts List (Part # D03-0104R1/3 or D03-0104R3/4)
Part # Description Qty
D03-0106 SCR Contactor 15 Amp 1
D03-0013-BRK DIN Rail Mount, 3.9" 1
D03-0711M SCR Drive Board Base Unit 1
DC-1859 Decal, 3A 250V Fuse Repl. Label 1
PNEG-1587 KBIC Control Kit Instructions 1
HH-1462 Wire Nuts 2
WR-16 BLK Wire, 16 Gauge Stranded Black MTW 4
WR-18 YLW Wire, 18 Gauge Stranded Yellow MTW 3
WR-18 WHT Wire, 18 Gauge Stranded White MTW 3
D03-0712-1/3 SCR Drive Board for 1/3 HP Motor 1
D03-0712-3/4 SCR Drive Board for 3/4 HP Motor 1
To reduce the risk of electrical shock or damage to electrical components, turn
OFF and lock out the main power supply before performing any service or
maintenance work on the dryer.