Grain Systems Bin Accessories PNEG-1655 - Manual (Page 13)

PNEG-1655 VTDL-135' - 8' x 9' Door Assembly w/ Manway 13
4. Suggested Tools
Recommended tools for installing VTDL-135' - 8' x 9' Doors
1. Forklift or similar piece of equipment capable of lifting 2000 lbs. at heights above 10'.
2. Welder.
3. Plasma cutter, torch or similar tool for cutting base plates.
4. Concrete drill for installing 3/4" epoxy type anchors (if anchors are used).
5. 1/2" and 7/16" drill bits.
6. Sockets and wrenches including 9/16", 5/8", 1-1/8" and 1-1/2" sizes.
7. Drift pins and/or pry bars.