Grain Systems Bin Accessories PNEG-1785 - Manual (Page 50)

4. Assembly Instructions
50 PNEG-1785 NCHT “X” Series Ladders
12. Figure 4AN shows assembly of wall bracket, wall bracket brace and ladder standoffs to wall angle.
Attach two (2) wall brackets (LDR-5169) (B) to first three (3) holes of wall angle (LDR-5168) (C) using
3/8" x 1" bolt (S-7927) (K) and flange nut (S-9373) (L).
Attach ladder wall bracket brace using 5/16" x 3/4" bin bolt (S-275) (H) and flange nut (S-3611) (I).
Attach ladder standoff to wedge using 5/16" x 1" carriage bolt (S-3550) (J) and flange nut (S-3611) (I).
Figure 4AN
Ref # Part # Description
A 4FOOTRF 4' Roll Formed Ladder
B LDR-5169 Ladder Sidewall Bracket
C LDR-5168 Ladder Sidewall Angle
D LDR-5197 Ladder Bracket Wall Brace
E LDR-4314 Ladder Standoff
F LDR-4198 Ladder Standoff Wedge
G LDR-4317 Ladder Section Splice Plate
H S-275 5/16" x 3/4" Bin Bolt
I S-3611 5/16" Flange Nut
J S-3550 5/16" x 1" Carriage Bolt
K S-7927 3/8" x 1" Flange Bolt
L S-9373 3/8" Flange Nut