Grain Systems Tanks PNEG-4072 - Manual (Page 93)

Chapter 7: Roof Assembly
C 1/2 x 1-3/4 in. flange bolt (S-10252) G 1/2 in. flange nut (S-10253)
D Center collar splice plate (CTR-0124)
4. Locate the column of three holes (K) that are not paired together on the inside radius of the center
collar, and install a center collar channel clip (H).
5. Secure with flange bolts (I) and flange nuts (J).
6. Repeat this procedure for the remaining three center collar channel clips (H).
Figure 7-16 Installing center collar channel clips
H Center collar channel clip (CTR-0083) J 1/2 in. flange nut (S-10253)
I 1/2 x 1-3/4 in. flange bolt (S-10252) K Row of three holes
7. Tighten all of the hardware to the recommended torque specifications, see Bolt Torque Specifica-
tions, page 24 .
Pneg-4072 72 Ft Diameter 40-Series Bin 93