Grain Systems PNEG-1402 - Manual (Page 51)

4. Dryer Electrical Conduits
PNEG-1402 Vision Series Model 1100 Portable Dryers 51
Right and Left Grain and Plenum High-Limits (Continued)
Figure 4D
Right and Left Grain and Plenum High-Limits Parts List (See Figure 4C and 4D)
Ref # Part # Description
1 D01-0254 High-Limit Mounting Bracket
2 D03-0004 Plenum Thermostat 10' 300° (for 14' Dryers Only)
2 D03-0377 Plenum Thermostat 24' 300° (for Dryers that are 16' and Longer)
3 FH-6972 Enclosure 4 x 4 x 2-1/2 White PVC
4 FH-7038 Sealtite PVC 3/8"
5 FH-7050 Elbow, 3/8" - 90° PVC w/ Nut
6 D03-0005 Grain Thermostat High-Limit 10' 210° (for 14' Dryers Only)
6 D03-0378 Grain Thermostat High-Limit 24' 210° (for Dryers that are 16' and Longer)
7 D03-0054 Connector 1/2" EMT Compression
8 D03-0057 Conduit 1/2" EMT Metallic
9 D03-0258 Grain Temperature Thermistor Ser2000
10 D03-0060 Connector 3/8" Liquid-tite to 1/2" EMT
11 HH-1096 Clamp 1/2" Conduit
12 D03-0375 Conduit Body, LL Type
13 TFC-0075 Cover Aluminum, Conduit Body
14 HF-7236 Plenum Thermistor Bolt
15 DM60001 Pipe SCH 40-1/2"
16 GT3-0241 Clamp, Beam 1/2"
The following components make up the grain high-limit conduits that run through the grain columns. The conduit assemblies are not
shown in the photos.
N/S D03-0057 Conduit 1/2" EMT Metallic
N/S D03-0054 Connector 1/2" EMT Compression (2/Conduit; 1 at Each End of the Dryer)
N/S D33-0002 Coupler 1/2" EMT Compression (Couples the Lengths of 1/2" EMT)
N/S FH-6972
Enclosure 4 x 4 x 2-1/2 White PVC (As of 2003 a 4 x 4 enclosure has been added to these assemblies
and is mounted on the rear column end panels into which the grain high-limit thermostat conduits
now terminate.)
Plenum high-limit thermostat conduit
13 12 15
16
14
11