Grain Systems Tanks PNEG-1861 - Manual

Date: 01-04-12 PNEG-1861
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-1861
CN-207004
Printed in the U.S.A.
Copyright © 2012 by GSI Group
www.gsiag.com
Page 1 of 1
JS500 to DT1500 Hardware
Reference Sheet
When viewing illustrations in the instruction manual PNEG-1000-JS with JS500 part numbers, use the
cross reference chart below to identify the correct DT1500 part number to be used.
JS500 to DT1500 Hardware Reference Guide
Part #
Description
JS500 DT1500
S-7482 S-10214
Flange Bolt 5/16"-18 x 3/4" Grade 8 or Grade 8.2 (Pre-Assembled with
Low Density Poly Sealing Washer)
S-7483 S-10215
Flange Bolt 5/16"-18 x 1-1/4" Full Threaded Grade 8 or Grade 8.2
(Pre-Assembled with Low Density Poly Sealing Washer)
S-7484 S-10216 Hex Nut 5/16"-18 Grade 5
S-7485 S-10217 Flange Bolt 3/8"-16 x 1" Grade 8 or Grade 8.2
S-7486 S-10218
Flange Bolt 3/8"-16 x 1-1/2" Grade 8 or Grade 8.2 (Fully Threaded,
No Sealing Washer)
S-7487 S-10221
Flange Bolt 3/8"-16 x 1" Grade 8 or Grade 8.2 (Pre-Assembled with
Low Density Poly Sealing Washer)
S-7488 S-10219
Flange Bolt 3/8"-16 x 1-1/2" Grade 8 or Grade 8.2 (Pre-Assembled with
Low Density Poly Sealing Washer)
S-7489 S-10222 Hex Nut 3/8"-16 Grade 5
S-9426 S-10220 Flange Nut 3/8"-16