Chapter 8: accessories – Grain Systems Tanks PNEG-4078 User Manual
Page 141
![background image](/manuals/277844/141/background.png)
Figure 8-17 Installing ladder brackets
B
Ladder assembly
J
5/16 in. hex bolt (S-275)
C
Starter bracket (RH LDR-4347)
K
Starter bracket (LH LDR-4346)
D
See sidewall hardware chart.
L
3/8 in. field drilled hole location
E
Approximately 18-3/4 in. (47.62 mm)
M
5/16 x 3/4 in. flange bolt (S-275)
F
3/8 in. field drilled hole location
N
5/16 in. flange nut (S-3611)
G
5/16 in. hex nut (S-396)
O
Standoff wedge (LDR-4198)
H
Standoff bracket (LDR-4314)
P
5/16 in. flange nut (S-3611)
I
Ladder reinforcing strap (LDR-5132)
Q
5/16 x 1 in. carriage bolt (S-3550)
Repeat this process for the remaining standoff brackets.
11.Field drill a 3/8 in. hole (L), and install hex bolts (M) and nuts (N), securing the ladder to the starter
brackets (C and K).
12.Tighten all hardware to the recommended torque specifications. See
Pneg-4078 78 Ft Diameter 40-Series Bin
141