Grain Systems PNEG-462 User Manual
Page 3
Advertising
4.
Attach front plate to the top plate with four 1/4” x 1” self-drilling screws.
5.
Bolt the side brackets in the front plate slot with the angles outward. Field drill two holes
(on inside corrugation hills) through the sidewall and install 5/16” x 3/4” bin bolts and
nuts.
6.
Position the side plates on each side with the angle outward and fasten in place using six
1/4” x 1” self-drilling screws.
NOTE: The corner bolt will need to be removed and reinstalled through the side plate,
side bracket and front plate.
Side Bracket
TD-100656
Left Side Plate
TD-100664
Self-drilling Screws
S-7229
Front Plate
TD-100655
Right Side Plate
TD-100663
Self-drilling Screws
S-7229
Advertising