Wilwood Promatrix Front and Rear Replacement Rotor Kit - Manual (Page 2)

Exploded Assembly Diagram and Parts List
5
1 2
6
4 3
Figure 1. Typical Installation Configuration
WARNING
INSTALLATION OF THIS KIT SHOULD ONLY BE
PERFORMED BY PERSONS EXPERIENCED IN
THE INSTALLATION AND PROPER OPERATION
OF DISC BRAKE SYSTEMS.
NOTE
SPECIFIC PARTS MAY VARY FROM DIAGRAM
1
2
3
4
5
6 2
2
2
2
48
48
160-12391/92
160-8508/09
170-13066
170-13067
230-6737
240-11240 Front Rotor, GT - 1.25” x 14.00” Dia, 12 x 8.25” Bolt Circle (one each, right and left)
Rear Rotor, GT - 1.10” x 13.00” Dia, 12 x 7.00” Bolt Circle (one each, right and left)
Front Hat, .56 Offset, 12 x 8.25” Bolt Circle
Rear Hat, .49 Offset, 12 x 7.00” Bolt Circle
Bolt, 1/4-20 x 1.00 Long, 12 Point
Washer, .265 I.D. x .500 O.D. x .063 Thick
ITEM NO. PART NO. DESCRIPTION QTY
Page 2
Important Notice - Read This First
Before any tear-down or disassembly begins, review the following information:
• Due to OEM production differences and other variations from vehicle to vehicle, the fastener hardware and
other components in this kit may not be suitable for a specific application or vehicle.
• It is the responsibility of the purchaser and installer of this kit to verify suitability / fitment of all components
and ensure all fasteners and hardware achieve complete and proper engagement. Improper or inadequate
engagement can lead to component failure.
NOTES:
Part Number 230-4572 Rotor Bolt Kit, includes part numbers 230-6737 and 240-11240