Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hub) - Manual (Page 3)

General Information and Disassembly Instructions
Parts List
Installation of this kit should ONLY be performed by persons experienced in the installation and proper operation of disc brake systems.
Before assembling the Wilwood front disc brake kit, double check the following items to ensure a trouble-free installation. Also, please read
these instructions thoroughly to be sure you have a complete understanding of the procedure involved before work is begun.
•Make sure this is the correct kit to match the exact make and model year of the vehicles spindle. This kit is designed specifically to fit
Classic Performance Product Drop Spindle, Part Number 30101.
•Verify the hub stud pattern in this kit matches the stud pattern of the vehicles wheels.
•Verify your wheel clearance using Figure 2.
•Inspect the package contents against the parts list (below) to ensure that all components and hardware are included.
1
2
3
4
5
6
7
8
9
10
11
12
12A
13
14
15
16
17
18
19
20
21
21A
22
23
24
25
26
27
28
29
30
31
2
2
2
2
2
1
2
10
2
2
2
2
2
2
24
24
6
2
2
2
2
2
2
4
4
2
4
12
4
4
4
4
12
249-10232/33
230-10251
240-11856
230-0817
240-11102
240-150-8855K
230-0819
230-6959
270-10237
370-0879
380-0928
160-8402/03
160-8400/01-BK
170-10231
240-11240
230-8037
230-10419
370-0877
240-9499
211-1674
270-2158
120-11780/81-BK
120-11780/81-RD
230-8693
230-11101
250-10229
240-3902
240-1848
230-9183
240-10190
230-9079
300-7392
240-1159 Bracket, Caliper, SL6, Flat
Bolt, 5/8-18 x 1.25 Long, Hex Head
Washer, .640 I.D. x 1.19 O.D. x .063 Thick
Bolt, 1/2-20 x 2.00 Long, Hex head
Washer, .515 I.D. x .875 O.D. x.063 Thick
Pad, BP-10, Axle Set
Nut, 1/2-13, Hex
Stud, 1/2-20 x 2.00 Long, 12 Point
Hub Assembly
Cone, Inner Bearing
Seal, Grease
Rotor, GT 1.10” Thk x 14.00” Dia, 12 x 8.75” Bolt Circle
Rotor, SRP Drilled and Slotted
Hat, 5 x 4.50”/4.75”, 1.20” offset, 12 x 7.00” Bolt Circle
Washer, .265 I.D. x .500 O.D. x .063 Thick
Bolt, 1/4-20 x .75 Long, 12 Point
Bolt, 1/4-20 x .50 Long, Flat Head
Cone, Outer Bearing
Washer, 3/4 Spindle
O-ring
Cap, Dust
Caliper, Superlite 6R
Caliper, Superlite 6R, Red
Bolt, 7/16-20 x 1.50 Long, Hex Head
Washer, .453 I.D. x .750 O.D. x .063 Thick
Bracket, Caliper Mounting
Shim, .015 Thick
Shim, .030 Thick
Nut, 3/8-24, Self Locking
Washer, .391 I.D. x .625 O.D. x .063 Thick
Stud, 3/8-16 x 3/8-24 x 3.15 Long (pre-installed in bracket)
Spacer, .573 Long
Shim, .035 Thick
ITEM NO. PART NO. DESCRIPTION QTY
NOTES:
Part Number 230-10252 Bolt Kit, flat caliper bracket to spindle, includes part numbers 230-0817, 230-0819, 230-8693, 230-10251,
240-11856, 240-11101 and 240-11102
Part Number 230-8008 Bolt Kit, rotor to hat, includes part numbers 230-8037 and 240-11240
Part Number 230-7032 Bolt Kit, hub to hat, includes part number 230-10419
Part Number 250-10285, Bracket Kit, caliper mounting, includes part numbers 230-9079, 230-9183, 240-1159, 240-10190, 240-3902,
240-1848, 250-10229 and 300-7392
Item 12A is an optional item and is included in the (D) drilled rotor kits. Add -D to end of part number when ordering.
Item 21A is an optional item and is included in the (R) red caliper kits. Add -R to end of part number when ordering.
Page 3