Wilwood Forged DPHA User Manual

Sales and marketing bulletin, Component features

Advertising
background image

4700 Calle Bolero

Camarillo, CA 93012

www.wilwood.com

Sales: (805) 388-1188

E-mail Tech Assistance:

[email protected]

Front DPHA 4 Piston Caliper Upgrade

Kits for Honda/Acura with 262mm Rotors

Models Covered:

Honda and Acura models originally equipped with 262mm
diameter rotors.

Kit Highlights:

Easy

direct

bolt-on

Forged

Billet

Aluminum

DynaPro Honda/Acura (DPHA) four piston Caliper.

Calipers bolt directly to the stock mounts on factory spindles
originally equipped with the 262 mm diameter rotor.

Calipers accept the M10 x 1.5 OE brake hose, and are fully
compatible with ABS and OE master cylinder output.

Fits inside many factory aluminum wheels including
the EM1 Si 15” wheel.*

Component Features:

Forged Billet DPHA

Calipers

Competition proven forged billet aluminum bodies demonstrate
superior strength and resistance to deflection and separation
under high load.

Four stainless steel pistons generate high clamping force and
balanced pad loading with low heat transfer and high resistance to
corrosion. Stainless steel pistons resist corrosion while slowing the heat
transfer rate from the pads to the caliper body.

The internal piston seal-in-bore design adds proven durability with
keeping the fluid in and dirt out without the need for external boot seals.

Spring loaded stainless steel SRS bridge plates reduce noise by
dampening engagement harmonics and eliminating pad rattle. SRS
plates also extend caliper service life by eliminating bridge gouging at
the pad trailing edge.

Top loaded pads are easily inspected and serviced without the need to
remove the caliper from the mount.

Calipers are available with either black or red gloss powder coat.

ULHP or SRP Series 262mm (10.32”) x 21mm (.83”) OE Replacement Rotors

ULHP plain-face rotors are cast from premium grade, long grain carbon iron, and provide high performance and rugged
durability for a wide range of competition, performance, and sport driving applications.

SRP performance rotors add Wilwood’s signature directional drill and slot design with a protective black e-coat finish. The drill
and slot pattern adds hi-tech styling with the venting qualities that preserve pad performance. The heat resistant e-coat finish
protects the rotors from rust on all areas that are not swept clean by the brake pads.

Wilwood BP-10

Smart Pads

Wilwood BP-10 Smart Pad is a unique metallic composite formula that provides quiet engagement and low dusting, but with the
added temperature range and higher friction values of a semi-metallic compound pad. BP-10 runs clean and quiet on the street,
with improved stopping power and fade-resistance for those fun days at the track.

Optional high-temp and race only pad compounds are also available.

*

Go to

www.wilwood.com

for complete year/make/model application data, installation instructions, and specific wheel clearance

requirements.

Front Kit Assembly with Red

Caliper and SRP Rotor

download high resolution photo,

click here

315 REV DATE: 04-30-13

Sales and Marketing Bulletin

Advertising