Cobalt Digital COMPASS 9121 3G_HD_SD-SDI_ASI Redundancy Switch - Manual (Page 24)

3
9121 Function Submenu List and Descriptions
3-4 9121 PRODUCT MANUAL 9121-OM (V1.2)
9121 Card Edge Control
Card edge control allows limited use of card without remote control, or can be
used where remote control is desired to be locked out.
Figure 3-1 shows and describes the 9121 card edge controls, indicators, and
display.
(continued)
• Reclock Enable Select For the four non-relay outputs (OUT 1-1 thru OUT 2), allows reclock
enable/disable for outputs sourced from Input A or Input B.
Note: If input is not carrying a valid SDI format supported by the card,
control should be set to Disabled. This allows passage of non-SDI
digital signals such as ASI or AES audio.
Card Name
Provides entry field for custom card name/ID.
Allows up to 15 characters to be entered for card ID (in this example “IRD
1A23-24 SW”).
Entered name appears in DashBoard card info header as well as
DashBoard frame tree view.
Table 3-1 9121 Function Submenu List — continued