9381 rear i/o modules -5, Installation and setup – Cobalt Digital COMPASS 9381 HD_SD-SDI Timecode Inserter User Manual
Page 27
![background image](/manuals/279996/27/background.png)
9381-OM (V4.3)
9381 PRODUCT MANUAL
2-5
Installation and Setup
Installing a Rear I/O Module
9381 Rear I/O Modules
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9381.
Notes: • Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied
with removable screw terminal block adapters. For clarity, the adapters are
omitted in the drawings below.
Table 2-1
9381 Rear I/O Modules
9381 Rear I/O Module
Description
RM20-9381-A
Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Analog VITC input (VITC IN)
• Four reclocked SDI input copies (RCK OUT 1- 4)
• Four buffered SDI coaxial outputs (SDI OUT 1- 4)
RM20-9381-A/S
Split Rear Module. Provides each of the following
connections for two 9381 cards:
• SDI coaxial input (SDI IN)
• Two SDI reclocked input copies (RCK OUT)
• Two SDI coaxial outputs (SDI OUT)