TC Electronic TonePrint Editor - Manual (Page 14)

Using TonePrint Editor
TonePrint Editor 2.0 12
TonePrint Templates
As described earlier, TonePrint Templates are a
great way of starting your personal sound cre-
ation, as they give you time-proven defaults for
all parameters.
To recall a template, select it from the “Tem-
plates” section of the drop-down menu in the
“TonePrints” section of the editor.
Please note that selecting a template will im-
mediately override all changes you might have
made to knob assignments, modifier curves and
parameter values.
The “Templates” section of the
TonePrint drop-down
Returning to template defaults
If you find that you have reached a dead end
when editing, you can simply click the “Load”
button next to the TonePrints drop-down menu
to reset the currently selected template to its de-
fault values. This will reset all knob assignments,
modifier curves and parameter values to the de-
faults stored in this template.
Router section
Kill Dry parameter
Settings: Off/On
Use the Kill Dry parameter to define wether your
instrument’s dry, unprocessed signal should
pass through the pedal. Setting Kill Dry to On
will mute the dry signal of your instrument. This
is especially useful for reverse delay effects and
vibrato effects – but you may find other, creative
uses for this parameter.