TC Electronic TonePrint Editor - Manual (Page 6)

Getting started
TonePrint Editor 2.0 4
Getting started
Ready…
If you haven’t already done so, download the
latest TonePrint Editor software from:
http://tcelectronic.com/toneprint-editor/
TonePrint Editor software is free.
Install TonePrint Editor.
– To install the PC (Windows) version, simply
move the .exe file you downloaded to a loca-
tion on your hard disk.
– To install the Mac (OS X) version, open the
.DMG file you downloaded. From the disk im-
age, copy TonePrint Editor.app to your appli-
cation folder or any other location where you
can easily find it.
Set…
– Set up your TC pedal as you normally would:
– Connect your instrument to the audio in
jack(s) of the pedal,
– connect the audio out jack(s) of the pedal to
your amp and
– connect the pedal to a power supply.
– Make sure you’ve got a basic sound (and a
sound level) you’re comfortable with, with the
effect bypassed.
– Turn the effect on.
– Connect your pedal to your computer using a
type A Male to Mini B Male USB cable.
Please note that you can only connect and
control one TonePrint-enabled product at
a time, even if your computer has multiple
USB ports.
– Using its Type Selector, switch your pedal to
the TonePrint slot you want to use.
– Open TonePrint Editor on your computer.
TonePrint!
When you open TonePrint Editor on your com-
puter, it will download and cache software up-
dates and TonePrint data and then present you
with the Library view.
! Please note that an Internet connection is
required for downloading the most current
TonePrints.
TonePrint Editor – Library view
Using the Library is described in the “Using
TonePrint Library” section of this manual.