Rainbow Electronics RC1090 - Manual (Page 15)

RC1040/1080/1090
 2005 Radiocrafts AS RC1040/RC1080/RC1090 Data Sheet (rev. 1.3) Page 15 of 17
Saturation 10 dBm
Input IP3 -18 dBm
Spurious emission, RX
RC1040/RC1080
RC1090
-57
-49
dBm
Supply voltage 2.8 5.5 V
Supply voltage rise time 150 us If appropriate rise time can not
be guaranteed, the RESET pin
should be activated after
supply voltage is stable.
Current consumption, IDLE/RX
RC1040
RC1080
RC1090
10.5
13
13
mA
Apply over entire supply
voltage range
Current consumption, TX 25 mA Apply over entire supply
voltage range
Current consumption, SLEEP 85 150 µA Max value in bold apply over
the entire temperature and
supply voltage range
Current consumption, OFF 0.003 1.5 µA Max value in bold apply over
the entire temperature and
supply voltage range
Digital I/O
Input logic level, low
Input logic level, high
Output logic level, low (1µA)
Output logic level, high(-1µA)
1.7
0
2.6
0.7
5.5
0.1
2.7
V
RXEN, TXEN, CONFIG, TXD
and RXD have internal 100 k
series resistors. No internal
pull-ups. Outputs should not be
loaded resistively.
RESET pin
Input logic level, low
Input logic level, high 1.7
0.7
2.7
V
Internal 100 k pull-up resistor
to VDD
ON/OFF pin
Input logic level, low
Input logic level, high 1.4
0.4
VCC
V
No internal pull-up resistor