Rainbow Electronics MAX7473 - Manual (Page 3)

MAX7472/MAX7473
HDTV Anti-Aliasing Filters with Triple-Input Mux
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(AV DD = +5V ±5%, DV DD = 2.7V to 3.6V, R LOAD = 150Ω to AGND, C IN = 0.1µF, T A = 0°C to +85°C, unless otherwise noted. Typical
values are at T A = +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Positive 350
Clamp Settling Time
To 1% with 100 IRE step
(Note 3)
Negative 650
H
Minimum Functional Input Sync
Amplitude
125 mV
T A = +25°C, MAX7472 (Note 1) -0.5 0 +0.5
Low-Frequency Gain
T A = +25°C, MAX7473 (Note 1) 5.5 6 6.5
dB
Low-Frequency Gain Matching 100kHz 0.05 dB
MAX7472 2.4 Maximum Input Voltage
Amplitude
MAX7473 1.2
V P-P
Maximum Output Voltage
Amplitude
DC to 30MHz 2.4 V P-P
Output Clamping Level Variation (Notes 1, 4) ±120 mV
Mux Crosstalk -80 dB
Channel-to-Channel Isolation 62 dB
Power-Supply Rejection Ratio PSRR 50 dB
DIGITAL INPUTS (A1, A0, SYNC_)
Input Logic High Voltage V IH 2.0 V
Input Logic Low Voltage V IL 0.8 V
Input Leakage Current I
IN
V
IN
= 0 to DV
DD
±1 ±10 µA
Input Capacitance C IN 6 pF
DIGITAL INPUTS (SDA, SCL)
Input Logic High Voltage V IH
0.7 x DV DD V
Input Logic Low Voltage V IL
0.3 x DV DD V
Input Hysteresis V HYST
0.05 x DV DD V
Input Leakage Current I IN V IN = 0 to DV DD ±0.1 ±10 µA
Input Capacitance C IN 6 pF
DIGITAL OUTPUT (SDA)
Output Logic Low Voltage V OL I SINK = 3mA 0.4 V
Tri-State Leakage Current I L V IN = 0 to DV DD ±0.1 ±10 µA
Tri-State Output Capacitance C OUT 6 pF
POWER REQUIREMENTS
Analog Supply Voltage Range AV DD 4.75 5 5.25 V
Digital Supply Voltage Range DV DD 2.7 3.3 3.6 V
Normal operation, no load 180 200
Analog Supply Current I AVDD
Power-down mode, no load 1 1.5
mA
Digital Supply Current I DVDD 25 µA