Rainbow Electronics W25Q32 - Manual (Page 41)

W25Q80, W25Q16, W25Q32
Publication Release Date: June 20, 2007
- 41 - Advanced - Revision A5
When used to release the device from the power-down state and obtain the Device ID, the instruction is
the same as previously described, and shown in figure 25, except that after /CS is driven high it must
remain high for a time duration of t
RES2 (See AC Characteristics). After this time duration the device will
resume normal operation and other instructions will be accepted. If the Release from Power-down /
Device ID instruction is issued while an Erase, Program or Write cycle is in process (when BUSY
equals 1) the instruction is ignored and will not have any effects on the current cycle
Figure 24. Release Power-down/High Performance Mode Instruction Sequence
Figure 25. Release Power-down / Device ID Instruction Sequence Diagram