Usart, Single usart, Atmega8515(l) – Rainbow Electronics ATmega8515L User Manual

Page 131

Advertising
background image

131

ATmega8515(L)

2512A–AVR–04/02

USART

The Universal Synchronous and Asynchronous serial Receiver and Transmitter
(USART) is a highly flexible serial communication device. The main features are:
•

Full Duplex Operation (Independent Serial Receive and Transmit Registers)

•

Asynchronous or Synchronous Operation

•

Master or Slave Clocked Synchronous Operation

•

High Resolution Baud Rate Generator

•

Supports Serial Frames with 5, 6, 7, 8, or 9 Data Bits and 1 or 2 Stop Bits

•

Odd or Even Parity Generation and Parity Check Supported by Hardware

•

Data OverRun Detection

•

Framing Error Detection

•

Noise Filtering Includes False Start Bit Detection and Digital Low Pass Filter

•

Three Separate Interrupts on TX Complete, TX Data Register Empty, and RX Complete

•

Multi-processor Communication Mode

•

Double Speed Asynchronous Communication Mode

Single USART

The ATmega8515 has one USART. The functionality for the USART is described below.

Note that in AT90S4414/8515 compatibility mode, the double buffering of the USART
receive register is disabled. For details, see “AVR USART vs. AVR UART – Compatibil-
ity” on page 133.

A simplified block diagram of the USART transmitter is shown in Figure 63. CPU acces-
sible I/O registers and I/O pins are shown in bold.

Advertising