Bit timer/counter1, Overview, Atmega8515(l) – Rainbow Electronics ATmega8515L User Manual

Page 94

Advertising
background image

94

ATmega8515(L)

2512A–AVR–04/02

16-bit
Timer/Counter1

The 16-bit Timer/Counter unit allows accurate program execution timing (event man-
agement), wave generation, and signal timing measurement. The main features are:
•

True 16-bit Design (i.e., allows 16-bit PWM)

•

Two Independent Output Compare Units

•

Double Buffered Output Compare Registers

•

One Input Capture Unit

•

Input Capture Noise Canceler

•

Clear Timer on Compare Match (Auto Reload)

•

Glitch-free, Phase Correct Pulse Width Modulator (PWM)

•

Variable PWM Period

•

Frequency Generator

•

External Event Counter

•

Four Independent Interrupt Sources (TOV1, OCF1A, OCF1B, and ICF1)

Overview

Most register and bit references in this document are written in general form. A lower
case “n” replaces the Timer/Counter number, and a lower case “x” replaces the output
compare unit channel. However, when using the register or bit defines in a program, the
precise form must be used, i.e., TCNT1 for accessing Timer/Counter1 counter value
and so on. The physical I/O register and bit locations for ATmega8515 are listed in the
“16-bit Timer/Counter Register Description” on page 116.

A simplified block diagram of the 16-bit Timer/Counter is shown in Figure 46. CPU
accessible I/O registers, including I/O bits and I/O pins, are shown in bold.

Advertising