Rainbow Electronics GT863-PY - Manual (Page 11)

GT863-PY Terminal Product Description
80269ST10026a Rev. 0 - 27/09/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved
page 11 of 50
2.5.1 Product Versions Identification - Documentation
2.5.1.1 Hardware Identification
Each Terminal has a Serial Number on the TYPE label, by which the IMEI of the Telit module
Engine inside can be retrieved from a production database at the manufacturer. In addition, the
IMEI can be obtained in functional conditions with a Data Terminal Equipment (DTE) as response
to a specific AT command: AT+CGSN, AT#CGSN.
The following accessories for the GT863-PY can be made available separately:
Article
Telit Part No.
GSM Quad-Band Antenna 2.5dBi gain, magnetic surface mount
with ca. 2,5 m coaxial cable RG174 and SMA m connector; 1rr0100056tlb
RS232 data cable, ca. 1,8m SubD9 m-f, straight 1ff1400065ezr
AC adapter: Input 100-240V AC 50..60Hz, Euro Plug
Output12V DC 1,2 A, ca. 1,8m cable with 4-pin plug
(Molex 43025-400), GPIO3 bridged to GND at plug 1jj0400034ezr
AC adapter: Input 100-240V AC, 50..60Hz, UK Plug
Output12V DC 1,2 A, ca. 1,8m cable with 4-pin plug
(Molex 43025-400), GPIO3 bridged to GND at plug 1jj0400035ezr
AC adapter: Input 100-240V AC, 50..60Hz, US Plug
Output12V DC 1,2 A, ca. 1,8m cable with 4-pin plug
(Molex 43025-400), GPIO3 bridged to GND at plug 1jj0400036ezr
NOTE: Specifications and Part Numbers are subject to modifications.
2.5.1.2 Software identification
The version of the Software (SW) (firmware) implemented in production (on the Telit Cellular
Engine inside) can be read from the SW label. In addition, the SW version can be obtained in
functional conditions with a Data Terminal Equipment (DTE) as response to a specific AT-
command: AT+CGMR. This is especially useful when the SW has been updated after delivery.