Rainbow Electronics GT863-PY - Manual (Page 5)

GT863-PY Terminal Product Description
80269ST10026a Rev. 0 - 27/09/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved
page 5 of 50
1 Overview
Aim of this document is the description of features, functions and interfaces of the Telit GT863-PY
Terminal which is a complete modem solution for wireless m2m applications based on the GE863-
PY core. Since this Terminal is ready for use as a subsystem for wireless connections, Safety
Information and basic instructions for taking the GT863-PY into operation are included, as well as
guidance to other documentation and practical hints for the first steps.
The
Telit GT863-PY Terminal is GSM Mobile Stations (MS class B) capable of using the GSM
Circuit Switched Data (CSD), Fax and Short Message Services (SMS).
NOTE: Telit GT863-PY Terminal is an evolution of EZ10-PCS with PYG option and EZ10-QUAD-
PY fully compatible with the previous models.
The frequency bands and GPRS class are reported in the following table:
Frequency Bands GPRS RJ11 AUX
Connector
Product Name
GSM-850 / EGSM-900 / DCS-
1800 / PCS-1900 MHz Quad-
Band
Class 10 GPIO Telit GT863-PY
The embedded PYTHON engine allows to perform stand-alone operations with the EASY SCRIPT
feature, interpreting user-defined scripts in PYTHON language, e.g. to read external sensors
connected to the General Purpose Inputs / Outputs (GPIO) on the RJ11 connector. Refer to the
chapter about Software Features in this Product Description.
The following table summarizes the possible interface configurations (for details refer to the
dedicated chapters of this document):