Rainbow Electronics HT49R70A-1 - Manual (Page 33)

MOV A,x Move immediate data to the accumulator
Description The 8-bit data specified by the code is loaded into the accumulator.
Operation ACC ¬ x
Affected flag(s)
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾
MOV [m],A Move the accumulator to data memory
Description The contents of the accumulator are copied to the specified data memory (one of the data
memories).
Operation [m] ¬ACC
Affected flag(s)
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾
NOP No operation
Description No operation is performed. Execution continues with the next instruction.
Operation PC ¬ PC+1
Affected flag(s)
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾
OR A,[m] Logical OR accumulator with data memory
Description Data in the accumulator and the specified data memory (one of the data memories) per-
form a bitwise logical_OR operation. The result is stored in the accumulator.
Operation ACC ¬ ACC ²OR² [m]
Affected flag(s)
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ Ö ¾ ¾
OR A,x Logical OR immediate data to the accumulator
Description Data in the accumulator and the specified data perform a bitwise logical_OR operation.
The result is stored in the accumulator.
Operation ACC ¬ ACC ²OR² x
Affected flag(s)
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ Ö ¾ ¾
ORM A,[m] Logical OR data memory with the accumulator
Description Data in the data memory (one of the data memories) and the accumulator perform a
bitwise logical_OR operation. The result is stored in the data memory.
Operation [m] ¬ACC ²OR² [m]
Affected flag(s)
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ Ö ¾ ¾
HT49R70A-1
Rev. 1.00 33 December 4, 2001