B&B Electronics ADAM-6066 - Manual User Manual
Page 70
Advertising
ADAM-6000 Series User Manual
60
Note: Normal/Diag
Switch
At one side of ADAM-6000W modules (ADAM-
6050W, ADAM-6051W and ADAM-5060W),
there is one Normal/Diag switch. When you set
that switch to the “Diag” end for diagnostic
mode, all related setting listed below will
become default value:
IP: 10.0.0.1
Password: 00000000
WEP: Off
SSID: WLAN for Ad-hoc mode
<ANY> for Infrastructure mode
Channel: 10
When you set that switch to “Normal” end for
normal mode, you can set the setting listed
above to the value you want. It is helpful to
change to diagnostic mode when you have
trouble to use your module.
Advertising