American Car Craft Corvette Side Vent Grilles Laser Mesh 2Pc Polished 2005-2013 C6 only User Manual
Page 2
4. Once you have achieved a nice contoured fit simply peel the red release liner from
the grille completely and then carefully set the grille in position. Press the
attachment tape to the fender on the inside as you apply pressure with you fingers
from the outside of the fender to create a nice bond. Once you have set the grille
simply press the inner fender back in place and then reassemble the fender liner to
complete the installation.
5. You have been supplied with two lengths of chrome trim (Optional) This
trim has been supplied to be placed at the outer edge of the vent opening to
add a nice finished appearance. Simply clean the vent ridge with household
rubbing alcohol then swipe with the adhesive promoter provided. Once
preparation is complete simply peel the red release liner from the precut trim
and set in place. Pressing firmly to set.
If any questions occur during installation please contact American Car Craft at
727-861-1500.
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520