Peterson StroboPlus HD Owners Manual - Manual (Page 7)

Headphone Output
The internal speaker is disabled and the output is routed to the 3.5 mm jack when a plug is inserted. This output
functions also as a line-out for connection to a P.A.
Vibe Clip™ Output
For use with a Vibe Clip (if the tuner is upgraded to tuner/metronome). See metronome instructions for more
information.
USB/Power Socket
This socket can be used to power or recharge the StroboPlus internal battery from any standard 5V cell phone-
style charger with a micro USB connector or from the USB connection on a computer. The socket is also used to
connect via computer to the Peterson website for updating the firmware or uploading custom settings or
configurations for the StroboPlus.
Thru/Output Jack ¼”
The input signal is routed to this jack for output to an amplifier or other sound equipment.
Microphone
The built-in microphone picks up the acoustic sound of the instrument to be tuned.
Volume Control
This control adjusts the volume of the audio tones, or metronome if equipped with the metronome feature.
Input Jack ¼”
To tune, plug the instrument’s output cable, external microphone, or a Peterson “TP” vibration tuning pickup into
this input jack. When this input jack is occupied, the built-in microphone is disabled.